For Office/Hotel RFID Hotel Door Lock System With Card Encoder Model: X023

For OfficeHotel RFID Hotel Door Lock System With Card Encoder Install on Door

سمات

1. Brief design, delicate shape with core of intelligent.
2. RF card and mechanical key two open methods.
3. Standard five-latch lock cylinder suit for office and home use.
4. Zinc alloy integrated mould with powerful damage capability.
5. Adapt to electroplating surface treatment which keeps nice appearance, better wear resistance and high bonding strength of coating.
6. Circuit board is moisture proof treatment, which extend the use life of the door lock.
7. Circuit board aging test to prevent poor soldering and cold soldering such situation improve the quality of the locks.
8. Low voltage notice.
9. Black and bronze color available.

Technology Data

Card chip: EM card/TEMIC T5557 card/Philips Mifare 1 card. (EM card use for home and office such place without need software.T5557 card use for hotel etc which need software. Mifare 1 card with software and consume function.)

Workmanship: Fill in electron module and induction coil in PVC piece.

Requirement of door thickness: more than 38mm, if the door is laciness, which should be 110mm distance from the door side.

Low voltage notice: the voltage of PCB less than 4.8V, red light flash and sound continuous to alarm need change new battery; the locks can open about 100 times in low voltage status.

Power: DC6V, 4 pcs AA 5# alkaline battery, can use for 1 year at normal situation

Working frequency: 125 kHz./13.56Mhz .

Working speed: 106KBPS.

Read card method: Contactless induction card.

Static consumption:≤10 uA .

Trends consumption: ≤200 mA

Working temperature: -35℃ ~65℃.

Working humidity: 15%～95%RH.

Material: Face panel: Zinc alloy ,Lock body outside: stainless steel, lock tongue and inside all metal material.

Dimension: 286*76*10 (mm).

Packing: 10 PCS/CTN, CTN Size: 710*380*330mm.